- SD card(anything class 10 and above 16GB is great)
Step 2: Download and Install BalenaEtcher.
Step 3: After Installing balenaEtcher, open the program and click on the "Flash from file" button and select the OS you have downloaded.
Step 4: Plug in your SD card and click on "Select Target" and choose the SD card you have plugged in.
(note that this must be a fresh SD card with no information on it because after installation all the information will be gone.)
Step 5: Click on Flash and wait until the process is over.
Step 6: After the process is done you will see this screen, disconnect the SD card and put it in your Raspberry Pi and you're ready to go!