Installing Raspbian OS on a SD card

The Raspberry Pi is a single-board computer that comes in many flavours, used for many projects, especially if your project needs to be discrete.
Post Reply
bbzrta
Site Admin
Posts: 3
Joined: Thu May 21, 2020 9:24 pm

Installing Raspbian OS on a SD card

Post by bbzrta »

For installing Raspbian OS on an SD card, we need the following items:
  • SD card(anything class 10 and above 16GB is great)
Step 1: Download the Raspberry Pi operating system suitable for yourself.
Image

Step 2: Download and Install BalenaEtcher.
Image

Step 3: After Installing balenaEtcher, open the program and click on the "Flash from file" button and select the OS you have downloaded.
Image

Step 4: Plug in your SD card and click on "Select Target" and choose the SD card you have plugged in.
(note that this must be a fresh SD card with no information on it because after installation all the information will be gone.)
Image

Step 5: Click on Flash and wait until the process is over.
Image
Image

Step 6: After the process is done you will see this screen, disconnect the SD card and put it in your Raspberry Pi and you're ready to go!
Image
Image

Post Reply